Mostrar Mensajes

Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.


Temas - pachu

Páginas: [1]
1
WeeWX / Weewx+Oregon Wmr300
« en: 31 de Agosto del 2022, 19:45:28 pm »
Buenas

Hace un tiempo que me estoy dando cuenta que cuando la raspi con Weewx "se cuelga" pues cada dos o tres meses le pasa y me doy cuenta,los datos que no ha podido recoger Wewwx los pierdo.
Normalmente al reiniciar la raspi los recogia de los almacenados en la memoria de la consola de la Oregon y no los perdía pero de hace un tiempo me estoy dando cuenta que sí...
Ya he probado a borrar la memoria de la consola por si estuviera llena y no pudiese almacenar más o que la memoria interna esté estropeda.También pienso si es debido a la versión que tenga de Weewx pero nunca me pasaba. :(

Saludos

2
WeeWX / ¿Nueva BBDD?
« en: 10 de Diciembre del 2021, 11:18:12 am »
Hola

Pues me preguntaba si aprovechando final de año,es posible empezar una nueva base de datos en 2022 manteniendo las archivos NOAA de los años anteriores sin que esto pueda interferir en los envíos a Meteoclimatic  ::)

saludos

3
WeeWX / Weewx no genera archivo anual
« en: 05 de Octubre del 2021, 18:39:06 pm »
Hola
 Me he dado cuenta que desde Junio,Weewx no me genera el archivo anual.
He accedido a la dirección /var/www/html/weewx/NOAA y borrado el archivo 2021.txt,reiniciado la raspi y no lo genera de nuevo.También la plantilla /etc/weewx/skins/neowx/NOAA-YYY.txt.tmpl la he metido de nuevo de una copia de seguridad y nada,en camio los meses sin problema  ???

Saludos

4
WeeWX / Weewx error
« en: 15 de Octubre del 2020, 09:32:30 am »
Hola
Se me queda medio colgada la raspi,genera parte de los datos y los gráficos se han quedado congelados a una hora y no se renuevan...antes de reinstalar pregunto si veis que puede ser en el error que aparace en el log  :;
Código: [Seleccionar]
Oct 15 09:25:14 raspberrypi weewx[1151] INFO weewx.manager: Added record 2020-10-15 09:25:00 CEST (1602746700) to database 'weewx.sdb'
Oct 15 09:25:14 raspberrypi weewx[1151] INFO weewx.manager: Added record 2020-10-15 09:25:00 CEST (1602746700) to daily summary in 'weewx.sdb'
Oct 15 09:25:19 raspberrypi weewx[1151] INFO weewx.cheetahgenerator: Generated 10 files for report SeasonsReport in 3.57 seconds
Oct 15 09:25:56 raspberrypi weewx[1151] INFO weewx.imagegenerator: Generated 12 images for report SeasonsReport in 37.06 seconds
Oct 15 09:25:56 raspberrypi weewx[1151] INFO weewx.reportengine: Copied 17 files to /var/www/html/weewx
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine: ftpgenerator: (0): caught exception '<class 'socket.error'>': [Errno 111] Conexión rehusada
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****  Traceback (most recent call last):
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****    File "/usr/share/weewx/weewx/reportengine.py", line 330, in run
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****      n = ftp_data.run()
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****    File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****      ftp_server.storbinary(stor_cmd, fd)
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****    File "/usr/lib/python2.7/ftplib.py", line 479, in storbinary
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****      conn = self.transfercmd(cmd, rest)
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****    File "/usr/lib/python2.7/ftplib.py", line 378, in transfercmd
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****      return self.ntransfercmd(cmd, rest)[0]
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****    File "/usr/lib/python2.7/ftplib.py", line 337, in ntransfercmd
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****      conn = socket.create_connection((host, port), self.timeout)
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****    File "/usr/lib/python2.7/socket.py", line 575, in create_connection
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****      raise err
Oct 15 09:25:57 raspberrypi weewx[1151] ERROR weewx.reportengine:         ****  error: [Errno 111] Conexión rehusada

5
WeeWX / Nueva versión weewx 4.0.0
« en: 30 de Abril del 2020, 21:00:51 pm »
Pues estaba haciendo unas pruebas para una segunda raspi con weewx y el script automático de jantoni y durante la instalación he visto pasar 4.0.0  :o :o
 
Novedades para los entendidos  *+*

 --------------------
 weewx change history
 --------------------

4.0.0 (30 Apr 2020)

Ported to Python 3. WeeWX should now run under Python 3.5 and greater, as
well as Python 2.7. Support for Python 2.5 and 2.6 has been dropped.

New facility for creating new user-defined derived types. See the Wiki
article https://github.com/weewx/weewx/wiki/WeeWX-V4-user-defined-types

WeeWX now uses the Python 'logging' facility. This means log, formats, and
other things can now be customized. Fixes issue #353.

Strings appearing in the data stream no longer cause a TypeError if they
can be converted to a number.

Strings can now be accumulated and extracted in the accumulators, making it
possible to include them in the database schemas.

The utility wee_reports now loads services, allowing it to use
user-supplied extensions. Fixes issue #95.

New default schema ("wview_extended") that offers many new types. The old
schema is still supported. Fixes issue #115.

Optional, more flexible, way of specifying schemas for the daily summaries.
The old way is still supported.

The install process now offers to register a user's station with weewx.com.

The package MySQL-python, which we used previously, is not always available
on Python 3. Ported the MySQL code to use the package mysqlclient as an
alternative.

The default for WOW no longer throttles posting frequency (the default used
to be no more than once every 15 minutes).

Added new aggregate types minsum, minsumtime, sum_le. PR #382.

Unit group group_distance is now a first-class group.

Added new tag $python_version.

Ported to Python2-PyMySQL package on OpenSUSE.

Added new aggregation types 'first' (similar to 'last'), 'diff' (the
difference between last and first value in the aggregation interval), and
'tderiv' (the difference divided by the time difference).

Created new unit group 'group_energy2', defined as watt-seconds. Useful for
high resolution energy monitors.

An observation type known to the system, but not in a record, will now
return a proper ValueTuple, rather than UnknownType.

Type "stormStart" was added to the unit system. Fixes issue #380.

Added new aggregation type 'growdeg'. Similar to 'heatdeg', or 'cooldeg',
it measures growing degree-days. Basically, cooldeg, but with a different
base. Fixes issue #367. Thanks to user Clay Jackson for guidance!

Ported OS uptime to OpenBSD. Fixes issue #428. Thanks to user Jeff Ross!

Catch SSL certificate errors in uploaders. Retry after an hour. Fixes issue
#413.

Wunderfixer has been ported to the new WU API. This API requires an API
key, which you can get from the WU. Put it in weewx.conf. Added option
--upload-only. Thanks to user Leon Shaner! Fixes issues #414 and #445.

Wee_import can now import Weather Display monthly log files.

Fixed problem where sub-sections DegreeDays and Trend were located under
the wrong weewx.conf section. Fixes issue #432. Thanks to user mph for
spotting this!

Added new parameters to the Weather Underground uploader. Fixes issue #435.

Added new air quality types pm1_0, pm2_5, and pm10_0 to the unit system.
Added new unit microgram_per_meter_cubed. Added new unit group,
group_concentration.

Plist for the Mac launcher now includes a log file for stderr.

Night-day transition in plots now uses shortest travel distance around
color wheel to minimize extra colors. Fixes issue #457. Thanks to user Alex
Edwards!

Fixed bug that causes plots to fail when both min and max are zero. Fixes
issue #463.

Fixed problem with sqlite driver that can lead to memory growth. See PR
#467. Thanks to user Rich Bell!

Fixed bug that caused windrun to be calculated wrongly under METRICWX unit
system. Fixes issue #452.

If a bad value of 'interval' is encountered in a record, the program will
simply ignore it, rather than stopping. Address issue #375.

Change in how the archive timespan is calculated in the engine. This allows
oddball archive intervals. Fixes issue #469.

NOAA reports are now more tolerant of missing data. Fixes issue #300.

Use of strftime() date and time format codes in template file names is now
supported as an alternative to the legacy 'YYYY', 'MM' and 'DD'. The legacy
codes continue to be supported for backwards compatibility. Fixes issue
#415.

New --calc-missing action added to wee_database to calculate and store
derived observations.

wee_import now calculates missing derived observations once all imported
data has been saved to archive. Fixes issue #443.

wee_import now tolerates periods that contain no source data. Fixes issue
#499.

wee_import now accepts strings representing cardinal, intercardinal and
secondary intercardinal directions in CSV imports. Partially fixes issue
#238.

The field delimiter character may now be defined for wee_import CSV
imports.

Ignore historical records if the timestamp is in the future.

Can now recover from MariaDB-specific database connection error 1927.

Changed the name of the unit "litre" to "liter", making its spelling more
consistent with "meter". The spelling "litre" is still accepted.

Systemd type changed from "simple" to "forking". Thanks to user Jaap de
Munck for figuring this one out!

The configuration file is now an optional argument when running weewxd
directly. This means most users will be able to use the simple command line
'sudo weewxd'.

Use correct log path for netbsd and openbsd in logger setup.

StdWXCalculate no longer calculates anything by default. Instead, types to
be calculated must be listed in weewx.conf. See the Upgrade Guide.

setup.py install no longer saves the old 'bin' subdirectory. Instead, it
simply overwrites it.

6
Incidencias / Desactivación estación ESCTB3900000039593F
« en: 10 de Noviembre del 2019, 19:14:14 pm »
Buenas
Debido a la tormenta de esta mañana ,desactivo la estación.Se me ha estropedo la estación wmr300,cayó un rayo muy fuerte y la ISS dejó de enviar datos a la consola.Despúes de unas 3 horas a empezado a recibir datos de nuevo sola  ::) pero no consigo que se conecte el usb de la consola.La raspberry que estaba conectada también ha petado y estoy probando con otra pero no la reconoce y tampoco sale el simbolo en la consola de "datta log".

En el archivo log no reconoce la consola...
 
Código: [Seleccionar]
pi@raspberrypi:~ $ lsusb
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Código: [Seleccionar]
pi@raspberrypi:~ $ sudo /etc/init.d/weewx status -l
● weewx.service - LSB: weewx weather system
   Loaded: loaded (/etc/init.d/weewx; generated; vendor preset: enabled)
   Active: active (exited) since Sun 2019-11-10 18:41:34 CET; 29min ago
     Docs: man:systemd-sysv-generator(8)
  Process: 289 ExecStart=/etc/init.d/weewx start (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/weewx.service

Nov 10 18:41:34 raspberrypi systemd[1]: Started LSB: weewx weather system.
Nov 10 18:41:34 raspberrypi weewx[452]: engine: Using configuration file /etc/weewx/weewx.conf
Nov 10 18:41:34 raspberrypi weewx[452]: engine: Loading station type WMR300 (weewx.drivers.wmr300)
Nov 10 18:41:34 raspberrypi weewx[452]: wmr300: driver version is 0.19rc5+dbg
Nov 10 18:41:34 raspberrypi weewx[452]: wmr300: usb info: pyusb_version=1.0.0
Nov 10 18:41:34 raspberrypi weewx[452]: wmr300: sensor map is {'outHumidity': 'humidity_1', 'extraDewpoint6': 'dewpoint_7', 'windchill': 'windchill', 'extraDewpoint4': 'dewpoint_5', 'rainRate': 'rain_rate', 'heatindex': 'heatindex_1', …'}
Nov 10 18:41:34 raspberrypi weewx[452]: wmr300: history limit is 5% at index 1667
Nov 10 18:41:35 raspberrypi weewx[452]: import of driver failed: Unable to find station on USB: cannot find device with VendorID=0x0fde ProductID=0xca08 (<class 'weewx.drivers.wmr300.WMR300Error'>)
Nov 10 18:41:35 raspberrypi weewx[452]: engine: Unable to load driver: Unable to find station on USB: cannot find device with VendorID=0x0fde ProductID=0xca08
Nov 10 18:41:35 raspberrypi weewx[452]:     ****  Exiting...
Hint: Some lines were ellipsized, use -l to show in full.

7
WeeWX / Problema traslado archivos NOAA
« en: 20 de Enero del 2018, 11:01:19 am »
Buenas

Con la reciente instalación de la WMR300,aproveché para actualizar Weewx de 2.6.4 a 3.8.0  ;)
El problema viene con la base de datos,ya que la versión 2.6.4 son dos archivos .sdb (weewx.sdb y stats.sdb) y en la nueva versión ya son solo uno (weewx.sdb).Intenté  meter el weewx.sdb en la nueva versión para ver si podía generar los nuevos archivos mensuales y anuales de los cuatro años que tiene pero no los genera,me parece que debe tener alguna parte corrupta por que ya me había dado algo de guerra anteriormente  ::)
Pensaba también como solución,dejar la nueva base de datos generada y meter los archivos .txt mensuales y anuales  anteriores en /var/www/html/weewx/NOAA y ya me aparecerían en los resúmenes de la web pero no los coge tampoco,supongo que como no son generados por la nueva base de datos de weewx 3.8.0  pues no los reconoce :;

¿puede haber alguna manera de meter estos resúmenes y que se puedan ver a en la web?


Saludos

8
Oregon Scientific / Comprar una Oregon Wmr300
« en: 20 de Noviembre del 2017, 13:23:37 pm »
Hola
Después de cuatro años con la PCE de iniciación la cual ha sido maltratada por el clima del norte de España ya pide cambio.La humedad,hielo y los cambios  tan bruscos de tiempo empiezan hacer aparición en los contactos eléctricos y el estado del plástico ya cristalizado se deja notar en el pluviometro y demás componentes aunque sinceramente no me quejo,ha sido bastante dura.

Estaba mirando el modelo de Oregon wmr300,el cual ya lleva un tiempo en el mercado y la relación calida precio se ajusta a mis necesidades.Veo que varios foreros  la tienen por lo que me pregunto que tal les va y si aguanta bién las inclemencias meteorológicas con el paso de los años, es decir ,si el plástico no se agrieta o la estanqueidad de los contactos eléctricos y demás componentes aguanta. ;)

Un saludo y gracias


9
Creacion de páginas personales meteorológicas / Facturación 1&1
« en: 28 de Febrero del 2017, 12:23:22 pm »
 Hola

Desde hace unos meses 1&1 me viene cobrando unos dos euros al mes a parte de los 9.99€ anuales del dominio.Estoy esperando que me contesten por que no tengo muy claro a que se debe que de un tiempo ahora me lo cobren  >:(

¿alguno os pasa lo mismo?

Su factura (1&1 Pack Dominio)

Con.  Servicios facturados        Tarifa                Cantidad      Importe  (EUR)  IVA(%)
1      Cuota mensual          0.00 EUR al mes        1 m.             0,00              21,00
2     Transferencia mensual 0.49 EUR al GB        4.522 MB        2,22               21,00
                                                                                                    2,22 EUR
                                                                                                    0,47 EUR
                                                                                                    ------------
                                                                                                      2,69 EUR TOTAL
 

10
WeeWX / Problema con FTP y weewx
« en: 15 de Mayo del 2016, 10:45:34 am »
Hola

Desde ayer por la tarde no me actualiza la web,en cambio la hora y fecha si.
He mirado el log y parece un error en la subida de datos por Ftp y hoy he comprobado en 1and1  que todo parece normal.
Hay momentos mientras toqueteaba el directorio de 1and que sube parte de los graficos pero no todos los datos...

Quizas sea problema de 1and1 pero me parece raro que desde ayer no funcione y hoy mientras lo miro funcione en parte.

pi@raspberrypi ~ $ sudo tail -f /var/log/weewx.log
May 15 10:39:15 raspberrypi weewx[2163]: ftpupload: Unable to create remote directory /eltiempo/backgrounds
May 15 10:39:33 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/dayhumidity.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:39:35 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/dayhumidity.png to ftp.meteolamadrid.es. Reason: 150 Opening BINARY mode data connection for /eltiempo/dayhumidity.png
May 15 10:39:35 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/dayhumidity.png
May 15 10:39:35 raspberrypi weewx[2163]: reportengine: Caught exception <type 'exceptions.IOError'> in FtpGenerator; Unable to create remote directory /eltiempo/backgrounds.
May 15 10:39:55 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/weekwind.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:40:15 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/weekwind.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:40:34 raspberrypi weewx[2163]: fousb: synchronising to the weather station (quality=1)
May 15 10:40:35 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/weekwind.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:40:35 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/weekwind.png
May 15 10:40:55 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/weektempdew.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:41:15 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/weektempdew.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:41:18 raspberrypi weewx[2163]: archive: added record 2016-05-15 10:39:01 CEST (1463301541) to database 'weewx.sdb'; table 'archive'
May 15 10:41:22 raspberrypi weewx[2163]: cheetahgenerator: generated 1 'SummaryByMonth' files for StandardReport in 2.54 seconds
May 15 10:41:28 raspberrypi weewx[2163]: cheetahgenerator: generated 1 'SummaryByYear' files for StandardReport in 6.70 seconds
May 15 10:41:34 raspberrypi weewx[2163]: cheetahgenerator: generated 14 'ToDate' files for StandardReport in 5.59 seconds
May 15 10:41:35 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/weektempdew.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:41:35 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/weektempdew.png
May 15 10:41:45 raspberrypi weewx[2163]: genimages: Generated 10 images for StandardReport in 10.78 seconds
May 15 10:41:55 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/yearwinddir.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:42:15 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/yearwinddir.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:42:35 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/yearwinddir.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:42:35 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/yearwinddir.png
May 15 10:42:55 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/daywind.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:15 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/index.html to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:15 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/daywind.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:35 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/daywind.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:35 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/daywind.png
May 15 10:43:36 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/index.html to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:55 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/monthbarometer.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:58 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/index.html to ftp.meteolamadrid.es. Reason: timed out
May 15 10:43:58 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/index.html
May 15 10:44:15 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/monthbarometer.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:44:18 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/weekrx.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:44:35 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/monthbarometer.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:44:35 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/monthbarometer.png
May 15 10:44:50 raspberrypi weewx[2163]: ftpupload: attempt #2. Failed uploading /eltiempo/weekrx.png to ftp.meteolamadrid.es. Reason: timed out
May 15 10:44:51 raspberrypi weewx[2163]: ftpupload: attempt #3. Failed uploading /eltiempo/weekrx.png to ftp.meteolamadrid.es. Reason: 200 Type set to I
May 15 10:44:51 raspberrypi weewx[2163]: ftpupload: Failed to upload file /eltiempo/weekrx.png
May 15 10:44:51 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/monthrx.png to ftp.meteolamadrid.es. Reason: 200 Type set to I
May 15 10:44:55 raspberrypi weewx[2163]: ftpupload: attempt #1. Failed uploading /eltiempo/monthwinddir.png to ftp.meteolamadrid.es. Reason: timed out



11
Incidencias / Aviso en el apartado "Mis estaciones"ESCTB3900000039593F
« en: 11 de Enero del 2016, 12:13:02 pm »
Hola,

Hoy casualmente he entrado en el apartado de "Mis estaciones" y me aparace este mensaje junto al índice Robertsson:
05092015 jag ESCTB3900000039593F Corrija temperatura mínima del 4-9-2015

Normalmente si hay alguna inconsistencia la veo en el apartado de los datos al tener el aspa o el aviso en la página principal pero aquí casi nunca suelo entrar.
He comprobado el dato y aparentemente está correcto y no me aparece ninguna inconsistencia en esa fecha. ???

Si me podeis echar un vistazo por si algo se me escapa...

saludos y gracias

12
Creacion de páginas personales meteorológicas / Ayuda modificar web weewx
« en: 17 de Diciembre del 2015, 13:10:33 pm »
Hola

Estoy modificando algunas "cosillas" de mi página web www.meteolamadrid.es pero hay una parte que no consigo cambiarla...

Quiero subir un poco los gráficos y la imagen de la webcam pero no doy con la modificación correcta.

Este es mi archivo index  https://www.dropbox.com/s/m4tzprb26rhwolf/index.html.tmpl?dl=0

Saludos y gracias


13
Davis Instruments / Duda compra Davis Vantage Vue
« en: 06 de Diciembre del 2015, 15:33:32 pm »
Hola

Después de dos años con la PCE me estoy planteando comprar un Vue e instalar la PCE en el pueblo de mis padres  ;)

En el foro anterior había mucha información sobre ella pero ahora se ha perdido y vuelven las dudas :(

La primera pregunta es obvia ¿donde comprarla? he visto la típicas tiendas españolas por un precio aproximado de 470€ sin datalogger.
¿hay algo mas barato? creo recordar del otro foro que de Holanda y de EEUU pero no se si merece la pena.

Respecto al datalogger creo que no es imprescindible,aunque no me queda muy claro como es la conexión a la raspberry después de leer la wiki y este hilo de Jantoni http://forum.meteoclimatic.net/index.php/topic,25.0.html

saludos y gracias

14
Ordenadores / Nueva raspberry pi zero
« en: 26 de Noviembre del 2015, 20:58:27 pm »
Hola

Acaba de salir al mercado una nueva Raspberry por 5$ aunque ya se sabe que los precios de los distribuidores para España pues elevan el precio.

https://www.raspberrypi.org/blog/raspberry-pi-zero/

El problema de este modelo es la falta de  conexión de red rj45 ,con lo que necesitariamos un hub para conectar el wifi y el usb de la estación meteorologica por lo que como comentaba anteriormente,además del precio la suma de los periféricos quizás no merece la pena este modelo si tenemos que comprarlos y sería mejor opción la B+ o la Pi2.

Algunas características...
•Procesador BCM2835 de Broadcom a 1 GHz
•512 MB de RAM
•Ranura de tarjetas de memoria microSD
•1 toma mini-HDMI para salida de vídeo con resolución Full HD y 60 fotogramas por segundo
•Conector GPIO de 40 pines
•Dos tomas Micro-USB para datos y energía


Páginas: [1]