1
WeeWX / Re:Mapa de estaciones Weewx
« en: 18 de Diciembre del 2021, 11:54:03 am »
Otra mas en el mapa. 
FORO EXCLUSIVO SOPORTE TECNICO ESTACIONES METEOCLIMATIC
Noticias:
Suscríbete al Canal Meteoclimatic en Telegram
https://t.me/Meteoclimatic
https://t.me/Meteoclimatic
Mostrar Mensajes
Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.
2
WeeWX / Re:No se me abre el cuadro de instalación de weewx
« en: 29 de Noviembre del 2019, 23:03:27 pm »
Mover un fichero a una carpeta:
mv fichero /carpeta
y renombrar un fichero:
mv cancion.mp3 musica.mp3
mv fichero /carpeta
y renombrar un fichero:
mv cancion.mp3 musica.mp3
3
WeeWX / Re:No funciona crontab
« en: 29 de Noviembre del 2019, 15:54:13 pm »
jmviper, esta vez si. Podemos decir que ya está solucionado. Desde ayer noche hasta el momento del mensaje está subiendo datos.
Gracias de nuevo por tu ayuda.
Saludos.
Gracias de nuevo por tu ayuda.
Saludos.
4
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 22:42:54 pm »
Listo:
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * /home/pi/meteoclimatic/meteoclimatic.sh
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * /home/pi/meteoclimatic/meteoclimatic.sh
5
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 22:36:30 pm »
Hecho:
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * /home/pi/meteoclimatic/meteoclimatic.sh
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * /home/pi/meteoclimatic/meteoclimatic.sh
6
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 22:26:06 pm »
Lo tengo así:
pi@raspberrypi:~ $ crontab -e
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * root /home/pi/meteoclimatic/meteoclimatic.sh
pi@raspberrypi:~ $ crontab -e
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * root /home/pi/meteoclimatic/meteoclimatic.sh
7
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 21:04:36 pm »
Hace el envío cada vez que ejecuto:
php /home/pi/meteoclimatic/meteoclimatic_http.php
pero luego ya no vuelve a hacer el envío más.
php /home/pi/meteoclimatic/meteoclimatic_http.php
pero luego ya no vuelve a hacer el envío más.
8
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:53:03 pm »
pi@raspberrypi:~ $ /home/pi/meteoclimatic/meteoclimatic.sh
PHP Warning: A non-numeric value encountered in /home/pi/meteoclimatic/meteoclimatic_http.php.old on line 71
La línea 71 es la del winrun… puedes copiar y pegar la plantilla aquí (quitando sig) a ver qué pone en ese campo ?
pi@raspberrypi:/etc/weewx/skins/Seasons $ cat meteoclimatic.htm.tmpl
*VER=DATA2
*COD=ESPVA0300000003009E
*SIG=-------------------
*UPD=$current.dateTime.format("%d-%m-%Y %H:%M")
*TMP=$current.outTemp.formatted
*WND=$current.windSpeed.formatted
*AZI=$current.windDir.formatted
*BAR=$current.barometer.formatted
*HUM=$current.outHumidity.formatted
*SUN=$current.radiation.formatted
*UVI=$current.UV.formatted
*DHTM=$day.outTemp.max.formatted
*DLTM=$day.outTemp.min.formatted
*DHHM=$day.outHumidity.max.formatted
*DLHM=$day.outHumidity.min.formatted
*DHBR=$day.barometer.max.formatted
*DLBR=$day.barometer.min.formatted
*DGST=$day.windGust.max.formatted
*DSUN=$day.radiation.max.formatted
*DHUV=$day.UV.max.formatted
*DPCP=$day.rain.sum.formatted
*WRUN=
*MHTM=$month.outTemp.max.formatted
*MLTM=$month.outTemp.min.formatted
*MHHM=$month.outHumidity.max.formatted
*MLHM=$month.outHumidity.min.formatted
*MHBR=$month.barometer.max.formatted
*MLBR=$month.barometer.min.formatted
*MGST=$month.windGust.max.formatted
*MSUN=$month.radiation.max.formatted
*MHUV=$month.UV.max.formatted
*MPCP=$month.rain.sum.formatted
*YHTM=$year.outTemp.max.formatted
*YLTM=$year.outTemp.min.formatted
*YHHM=$year.outHumidity.max.formatted
*YLHM=$year.outHumidity.min.formatted
*YHBR=$year.barometer.max.formatted
*YLBR=$year.barometer.min.formatted
*YGST=$year.windGust.max.formatted
*YSUN=$year.radiation.max.formatted
*YHUV=$year.UV.max.formatted
*YPCP=$year.rain.sum.formatted
*EOT*
pi@raspberrypi:/etc/weewx/skins/Seasons $
9
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:50:09 pm »En /var/log el usuario pi no tiene permisos para escribir en el log que se crea.
Ejecuta esto:
sudo touch /var/log/meteoclimatic.log && sudo chown pi:pi /var/log/meteoclimatic.log
Y ya irá escribiendo en ese log
Lo he cambiado a /home/pi/meteoclimatic/meteoclimatic.log
10
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:45:08 pm »No sé si será un problema escribir el log en /var/log/meteoclimatic.log. Yo lo dirigiría también a /home/pi/meteoclimatic
Qué sucede al ejecutarlo ?
/home/pi/meteoclimatic.sh
Ahora me indica esto:
pi@raspberrypi:~ $ /home/pi/meteoclimatic/meteoclimatic.sh
PHP Warning: A non-numeric value encountered in /home/pi/meteoclimatic/meteoclimatic_http.php.old on line 71
11
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:38:17 pm »pi@raspberrypi:~ $ /home/pi/meteoclimatic/meteoclimatic.sh
/home/pi/meteoclimatic/meteoclimatic.sh: línea 7: /var/log/meteoclimatic.log: Permiso denegadoNo sé si será un problema escribir el log en /var/log/meteoclimatic.log. Yo lo dirigiría también a /home/pi/meteoclimatic
Qué sucede al ejecutarlo ?
/home/pi/meteoclimatic.sh
No comprendo lo que me quieres decir en el anterior mensaje
He quitado la copia de weewx en contab -e
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * root /home/pi/meteoclimatic/meteoclimatic.sh
Y he cambiado la escritura del log.
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.sh
#!/bin/bash
cd /home/pi/meteoclimatic
#Si no quieres log
#php meteoclimatic_http.php.old
#Si quieres log
php meteoclimatic_http.php.old >> /home/pi/meteoclimatic/meteoclimatic.log
exit
Sigue igual, no sube los datos.....
12
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:30:38 pm »
pi@raspberrypi:~ $ /home/pi/meteoclimatic/meteoclimatic.sh
/home/pi/meteoclimatic/meteoclimatic.sh: línea 7: /var/log/meteoclimatic.log: Permiso denegado
No comprendo lo que me quieres decir en el anterior mensaje
He quitado la copia de weewx en contab -e
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * root /home/pi/meteoclimatic/meteoclimatic.sh
Y he cambiado la escritura del log.
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.sh
#!/bin/bash
cd /home/pi/meteoclimatic
#Si no quieres log
#php meteoclimatic_http.php.old
#Si quieres log
php meteoclimatic_http.php.old >> /home/pi/meteoclimatic/meteoclimatic.log
exit
/home/pi/meteoclimatic/meteoclimatic.sh: línea 7: /var/log/meteoclimatic.log: Permiso denegado
No sé si será un problema escribir el log en /var/log/meteoclimatic.log. Yo lo dirigiría también a /home/pi/meteoclimatic
Qué sucede al ejecutarlo ?
/home/pi/meteoclimatic.sh
No comprendo lo que me quieres decir en el anterior mensaje
He quitado la copia de weewx en contab -e
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').
#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
#
# Envía datos a Meteoclimatic cada 15 minutos, empezando en el minuto 2 de cada hora
2-59/15 * * * * root /home/pi/meteoclimatic/meteoclimatic.sh
Y he cambiado la escritura del log.
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.sh
#!/bin/bash
cd /home/pi/meteoclimatic
#Si no quieres log
#php meteoclimatic_http.php.old
#Si quieres log
php meteoclimatic_http.php.old >> /home/pi/meteoclimatic/meteoclimatic.log
exit
13
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:16:11 pm »
jajajajaja... eso espero. Estoy atento al siguiente envio.
14
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 20:11:59 pm »
jmviper, ya sube los datos a meteoclimatic.
No sé que ha pasado pero ya funciona. Muchas gracias por tu ayuda, solo no lo habría logrado.
Un saludo.
No sé que ha pasado pero ya funciona. Muchas gracias por tu ayuda, solo no lo habría logrado.
Un saludo.
15
WeeWX / Re:No funciona crontab
« en: 28 de Noviembre del 2019, 19:59:23 pm »
Aqui lo tienes jmviper.
pi@raspberrypi:~ $ ls -l /home/pi/meteoclimatic
total 48
-rw-r--r-- 1 pi pi 19604 dic 4 2017 meteoclimatic_http.php
-rw-r--r-- 1 pi pi 19049 dic 4 2017 meteoclimatic_http.php.old
-rw-r--r-- 1 pi pi 181 nov 28 19:57 meteoclimatic.ini
-rwxr-xr-x 1 pi pi 174 nov 28 16:55 meteoclimatic.sh
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.sh
#!/bin/bash
cd /home/pi/meteoclimatic
#Si no quieres log
#php meteoclimatic_http.php.old
#Si quieres log
php meteoclimatic_http.php.old >> /var/log/meteoclimatic.log
exit
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.ini
[Global]
Stations=ESPVA0300000003009E
DigestKey=
[ESPVA0300000003009E]
Path=/var/www/html/weewx/meteoclimatic.htm
Password=-------------
StationVendor=Davis
StationModel=Vantage Pro2
pi@raspberrypi:~ $ ls -l /home/pi/meteoclimatic
total 48
-rw-r--r-- 1 pi pi 19604 dic 4 2017 meteoclimatic_http.php
-rw-r--r-- 1 pi pi 19049 dic 4 2017 meteoclimatic_http.php.old
-rw-r--r-- 1 pi pi 181 nov 28 19:57 meteoclimatic.ini
-rwxr-xr-x 1 pi pi 174 nov 28 16:55 meteoclimatic.sh
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.sh
#!/bin/bash
cd /home/pi/meteoclimatic
#Si no quieres log
#php meteoclimatic_http.php.old
#Si quieres log
php meteoclimatic_http.php.old >> /var/log/meteoclimatic.log
exit
pi@raspberrypi:~ $ cat /home/pi/meteoclimatic/meteoclimatic.ini
[Global]
Stations=ESPVA0300000003009E
DigestKey=
[ESPVA0300000003009E]
Path=/var/www/html/weewx/meteoclimatic.htm
Password=-------------
StationVendor=Davis
StationModel=Vantage Pro2