16
WeeWX / Re:Mapa de estaciones Weewx
« en: 25 de Septiembre del 2022, 20:27:36 pm »
Si, si aparece la estación desde el principio que la tengo, en link a la web y todo, pero no sale el pic de la imagen.
Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.
pi@raspberrypi:~ $ sudo weewxd /etc/weewx/weewx.conf
LOOP: 2022-08-24 19:13:48 CEST (1661361228) 'altimeter': '30.1236318679052', 'appTemp': '88.48130381770645', 'barometer': '29.895835697878287', 'cloudbase': '13116.226116115813', 'dateTime': '1661361228', 'dewpoint': '47.00044969619644', 'ET': 'None', 'heatindex': '87.76296976560006', 'humidex': '92.18363142978141', 'inDewpoint': '52.2817803741572', 'inHumidity': '41.0', 'inTemp': '77.9', 'maxSolarRad': '216.29421501724354', 'outHumidity': '22.0', 'outTemp': '91.2', 'pressure': '26.929', 'radiation': '50.29', 'rain': 'None', 'rainRate': '0.0', 'usUnits': '1', 'UV': '0.0', 'windchill': '91.2', 'windDir': '264.0', 'windGust': '4.5', 'windrun': 'None', 'windSpeed': '3.6'
latitude = 39.809467
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -2.083319
# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 936, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
station_type = Interceptor
# If you have a website, you may specify an URL. This is required if you
# intend to register your station.
station_url = http://www.olmedadelrey.com/meteo
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge, smarthub, or access
# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
# ecowitt-client - any hardware that uses the ecowitt protocol
# wu-client - any hardware that uses the weather underground protocol
device_type = ecowitt-client
port = 8000
##############################################################################
#[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
# loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
# mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
# is to use the present time.
#start = 2011-01-01T00:00
# The driver to use:
#driver = weewx.drivers.simulator
##############################################################################