Mostrar Mensajes

Esta sección te permite ver todos los posts escritos por este usuario. Ten en cuenta que sólo puedes ver los posts escritos en zonas a las que tienes acceso en este momento.


Mensajes - FERRIS

Páginas: [1]
1
Cumulus y Cumulus MX / Re:descargar cumulus mx
« en: 11 de Enero del 2018, 10:54:00 am »
Muchas gracias por tu ayuda., lo tengo todo claro..

2
Weather Display / Re:licencia weather display
« en: 10 de Enero del 2018, 17:21:55 pm »
Gracias.

3
Cumulus y Cumulus MX / Re:descargar cumulus mx
« en: 10 de Enero del 2018, 17:16:42 pm »
La pregunta es , cual es el numero de compilacion de cumulus , dice en ingles que esta en la portada del foro.

4
Cumulus y Cumulus MX / descargar cumulus mx
« en: 10 de Enero del 2018, 11:53:38 am »
Buenos dias , etoy intentando registrarme en la web Sandaysoft , para poder descargar el programa cumulus mx para w10 , pero no entiendo la ptegunta de comfirmacion , por favor si alguien me pudiese ayudar-
gracias.

5
Weather Display / licencia weather display
« en: 10 de Enero del 2018, 10:10:29 am »
Hola buenos dias , quisiera saber para cuantos pc , sirve una licencia de weather display.
Gracias

6
Forum General / Re:empezando en meteoclimatic-
« en: 09 de Diciembre del 2017, 16:04:01 pm »
Muchas gracias por tu informacion , de momento voy a empezar por ahi , creo que mas adelante intentare realizar el montaje de una web propia,
un saludo,

7
Forum General / empezando en meteoclimatic-
« en: 09 de Diciembre del 2017, 13:08:35 pm »
Hola , tengo instalada una davis vantage vue y queria subir datos a meteoclimatic , mi idea es utilizar cumulus o waterlink , junto con virtual start , tengo claro como descargar la plantilla , pero tengo una duda , ¿necesito tener un dominio propio para poder subir datos ? . Puede que mas adelante intente realizar una pagina web , pero de momento queria empezar subiendo solo datos.
un saludo.

8
WeeWX / Re:Descripción de weewx.conf
« en: 06 de Mayo del 2016, 08:29:54 am »
ya lo tengo solucionado , muchas gracias por tu ayuda.
un saludo.

9
WeeWX / Re:Descripción de weewx.conf
« en: 04 de Mayo del 2016, 20:43:43 pm »
hola buenas tardes , entiendo que lo tendre que modificar con putty , pero no lo acabo de ver tal como me lo describes .
saludos

10
WeeWX / Re:Descripción de weewx.conf
« en: 04 de Mayo del 2016, 00:53:05 am »
hola buenas noches perdona mi ignorancia, pero esto es un poco nuevo para mi , estoy modificando la configuracion , hasta aqui todo claro y muy bien explicado por cierto , mi consuta es de que manera guardo las modificaciones realizadas , ya que cuando le doy a guardar me dice que el archivo no se puede abrir parar escritura.
gracias.

11
WeeWX / Re:Instalación de Weewx automatizada
« en: 27 de Abril del 2016, 20:21:43 pm »

hola buenas tardes , soy novato en estos temas ,te comento estando instalando tu escript , para una davis vue , todo iba perfectamente estando ya configurando los datos de la estacion , cuando tuve un apagon de luz en casa ,quedando la instalacion a medio hacer, he vuelto a intentar reiniciar la instalacion desde cero otra vez , pero llego aun punto que no me dja continuar, por favor decidme que pudiese hacer, os adjunto el punto donde esta el error.
gracias.


login as: pi
pi@192.168.0.105's password:
Linux raspberrypi 4.1.13+ #826 PREEMPT Fri Nov 13 20:13:22 GMT 2015 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Apr 27 17:53:55 2016 from 192.168.0.103
pi@raspberrypi ~ $ wget http://jantoni.no-ip.org/download/raspweather/weewx.sh
--2016-04-27 18:10:02--  http://jantoni.no-ip.org/download/raspweather/weewx.sh
Resolving jantoni.no-ip.org (jantoni.no-ip.org)... 83.54.228.159
Connecting to jantoni.no-ip.org (jantoni.no-ip.org)|83.54.228.159|:80... connect                                       ed.
HTTP request sent, awaiting response... 200 OK
Length: 983 [text/x-sh]
Saving to: `weewx.sh.1'

100%[======================================>] 983         --.-K/s   in 0s

2016-04-27 18:10:02 (7.38 MB/s) - `weewx.sh.1' saved [983/983]

pi@raspberrypi ~ $ chmod +x weewx.sh
pi@raspberrypi ~ $ sudo ./weewx.sh
Hit http://mirrordirector.raspbian.org wheezy Release.gpg
Hit http://archive.raspberrypi.org wheezy Release.gpg
Hit http://archive.raspberrypi.org wheezy Release
Hit http://mirrordirector.raspbian.org wheezy Release
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Hit http://mirrordirector.raspbian.org wheezy/main armhf Packages
Hit http://mirrordirector.raspbian.org wheezy/contrib armhf Packages
Hit http://mirrordirector.raspbian.org wheezy/non-free armhf Packages
Hit http://mirrordirector.raspbian.org wheezy/rpi armhf Packages
Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
 weewx : Depends: python-configobj (>= 4.5) but it is not installed
         Depends: python-cheetah (>= 2.0) but it is not installed
         Depends: python-serial (>= 2.3) but it is not installed
         Depends: python-usb (>= 0.4) but it is not installed
         Recommends: python-dev (>= 2.5) but it is not installed
         Recommends: python-pip (>= 0.7) but it is not installed
         Recommends: rsync but it is not installed
E: Unmet dependencies. Try using -f.
--2016-04-27 18:11:29--  http://www.weewx.com/downloads/weewx_3.5.0-1_all.deb
Resolving www.weewx.com (www.weewx.com)... 97.74.144.107
Connecting to www.weewx.com (www.weewx.com)|97.74.144.107|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1022130 (998K) [text/plain]
Saving to: `weewx_3.5.0-1_all.deb.10'

100%[=============================================================================>] 1,022,130   38.0K/s   in 28s

2016-04-27 18:11:58 (35.0 KB/s) - `weewx_3.5.0-1_all.deb.10' saved [1022130/1022130]

Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libwebp5
E: Unable to locate package libwebpdemux1
E: Unable to locate package libwebpmux1
E: Unable to locate package python-pil
(Reading database ... 68110 files and directories currently installed.)
Preparing to replace weewx 3.5.0-1 (using weewx_3.5.0-1_all.deb) ...
Unpacking replacement weewx ...
dpkg: dependency problems prevent configuration of weewx:
 weewx depends on python-configobj (>= 4.5); however:
  Package python-configobj is not installed.
 weewx depends on python-cheetah (>= 2.0); however:
  Package python-cheetah is not installed.
 weewx depends on python-serial (>= 2.3); however:
  Package python-serial is not installed.
 weewx depends on python-usb (>= 0.4); however:
  Package python-usb is not installed.

dpkg: error processing weewx (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 weewx
ln: failed to create symbolic link `/var/www/html/weewx': No such file or directory
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
 weewx : Depends: python-configobj (>= 4.5) but it is not going to be installed
         Depends: python-cheetah (>= 2.0) but it is not going to be installed
         Depends: python-serial (>= 2.3) but it is not going to be installed
         Depends: python-usb (>= 0.4) but it is not going to be installed
         Recommends: python-dev (>= 2.5) but it is not going to be installed
         Recommends: python-pip (>= 0.7) but it is not going to be installed
         Recommends: rsync but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
[ ok ] Stopping enhanced syslogd: rsyslogd.
[ ok ] Starting enhanced syslogd: rsyslogd.
pi@raspberrypi ~ $

12
Forum General / dudas sobre software eusotec
« en: 12 de Abril del 2016, 20:15:30 pm »
hola buenas tardes , tengo una estacion Davis vantage vue , con servidor eusotec , necesitaria por favor que me indicasen los pasos para poder dar de alta la estacion , tengo dudas a la hora de confeccionar la plantilla , sobre todo en el apartado del sofware , ya que entre las opciones no encuentro cual es la valida para mi servidor eusotec.
gracias.

13
Presentación / hola a todos
« en: 12 de Abril del 2016, 20:10:41 pm »
hola , vengo desde un pequño pueblo de valencia , llamado villalonga, para intentar aprender y colraborar.
un saludo.

Páginas: [1]