Hola, Jmviper. Ya no sé que mirar, estoy sin ideas. Te adjunto fichero meteoclimatic.ini
pi@raspberrypi:~ $ sudo cat /root/meteoclimatic/meteoclimatic.ini
[Global]
Stations=ESPVA0300000003009E
DigestKey=
[ESPVA0300000003009E]
Path=/var/www/html/weewx/meteoclimatic.htm
Password=mi contraseña para entrar en meteoclimatic
StationVendor=Davis
StationModel=Vantage Pro2
Ruta con plantilla:
pi@raspberrypi:/var/www/html/weewx $ cat meteoclimatic.htm
*VER=DATA2
*COD=ESPVA0300000003009E
*SIG=números y letras que descarge con la plantilla
*UPD=$current.dateTime.format("%d-%m-%Y %H:%M")
*TMP=$current.outTemp.formatted
*WND=$current.windSpeed.formatted
*AZI=$current.windDir.formatted
*BAR=$current.barometer.formatted
*HUM=$current.outHumidity.formatted
*SUN=$current.radiation.formatted
*UVI=$current.UV.formatted
*DHTM=$day.outTemp.max.formatted
*DLTM=$day.outTemp.min.formatted
*DHHM=$day.outHumidity.max.formatted
*DLHM=$day.outHumidity.min.formatted
*DHBR=$day.barometer.max.formatted
*DLBR=$day.barometer.min.formatted
*DGST=$day.windGust.max.formatted
*DSUN=$day.radiation.max.formatted
*DHUV=$day.UV.max.formatted
*DPCP=$day.rain.sum.formatted
*WRUN=
*MHTM=$month.outTemp.max.formatted
*MLTM=$month.outTemp.min.formatted
*MHHM=$month.outHumidity.max.formatted
*MLHM=$month.outHumidity.min.formatted
*MHBR=$month.barometer.max.formatted
*MLBR=$month.barometer.min.formatted
*MGST=$month.windGust.max.formatted
*MSUN=$month.radiation.max.formatted
*MHUV=$month.UV.max.formatted
*MPCP=$month.rain.sum.formatted
*YHTM=$year.outTemp.max.formatted
*YLTM=$year.outTemp.min.formatted
*YHHM=$year.outHumidity.max.formatted
*YLHM=$year.outHumidity.min.formatted
*YHBR=$year.barometer.max.formatted
*YLBR=$year.barometer.min.formatted
*YGST=$year.windGust.max.formatted
*YSUN=$year.radiation.max.formatted
*YHUV=$year.UV.max.formatted
*YPCP=$year.rain.sum.formatted
*EOT*
weewx.conf
pi@raspberrypi:/etc/weewx $ cat weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <tkeffer@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.9.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Alicante - Norte"
# Latitude and longitude in decimal degrees
latitude = 38.370923
longitude = -0.500629
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 82, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = Vantage
# If you have a website, you may specify an URL
#station_url =
http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = True
# Whether to log an unsuccessful operation
log_failure = False
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g,
www.myserver.org path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
##############################################################################
skin.conf
pi@raspberrypi:/etc/weewx/skins/Standard $ cat skin.conf
###############################################################################
# STANDARD SKIN CONFIGURATION FILE #
# Copyright (c) 2010-2018 Tom Keffer <tkeffer@gmail.com> #
# See the file LICENSE.txt for your rights. #
###############################################################################
###############################################################################
# The following section is for any extra tags that you want to be available in the templates
[Extras]
# This radar image would be available as $Extras.radar_img
#radar_img =
http://radar.weather.gov/ridge/lite/N0R/RTX_loop.gif # This URL will be used as the image hyperlink:
#radar_url =
http://radar.weather.gov/ridge/radar.php?product=NCR&rid=RTX&loop=yes # If you have a Google Analytics ID, uncomment and edit the next line, and
# the analytics code will be included in your generated HTML files:
#googleAnalyticsId = UA-12345678-1
###############################################################################
# The CheetahGenerator creates files from templates. This section
# specifies which files will be generated from which template.
[CheetahGenerator]
# Possible encodings are 'html_entities', 'utf8', or 'strict_ascii'
encoding = html_entities
[[SummaryByMonth]]
# Reports that summarize "by month"
[[[NOAA_month]]]
encoding = strict_ascii
template = NOAA/NOAA-YYYY-MM.txt.tmpl
[[SummaryByYear]]
# Reports that summarize "by year"
[[[NOAA_year]]]
encoding = strict_ascii
template = NOAA/NOAA-YYYY.txt.tmpl
[[ToDate]]
# Reports that show statistics "to date", such as day-to-date,
# week-to-date, month-to-date, etc.
[[[day]]]
template = index.html.tmpl
[[[week]]]
template = week.html.tmpl
[[[month]]]
template = month.html.tmpl
[[[year]]]
template = year.html.tmpl
[[[RSS]]]
template = RSS/weewx_rss.xml.tmpl
[[[Mobile]]]
template = mobile.html.tmpl
[[[MobileSmartphone]]]
template = smartphone/index.html.tmpl
[[[MobileTempOutside]]]
template = smartphone/temp_outside.html.tmpl
[[[MobileRain]]]
template = smartphone/rain.html.tmpl
[[[MobileBarometer]]]
template = smartphone/barometer.html.tmpl
[[[MobileWind]]]
template = smartphone/wind.html.tmpl
[[[MobileRadar]]]
template = smartphone/radar.html.tmpl
[[[Meteoclimatic]]]
template = meteoclimatic.htm.tmpl
###############################################################################
Directorio donde está la plantilla:
pi@raspberrypi:/etc/weewx/skins/Standard $ dir
backgrounds index.html.tmpl mobile.css month.html.tmpl RSS smartphone statistics-b.inc~ weewx.css
favicon.ico meteoclimatic.htm.tmpl mobile.html.tmpl NOAA skin.conf statistics-a.inc~ week.html.tmpl year.html.tmpl
Apache2:
pi@raspberrypi:~ $ sudo service apache2 status
● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2019-11-25 16:56:36 CET; 2h 55min ago
Docs:
https://httpd.apache.org/docs/2.4/ Process: 464 ExecStart=/usr/sbin/apachectl start (code=exited, status=0/SUCCESS)
Main PID: 565 (apache2)
Tasks: 11 (limit: 2200)
Memory: 19.2M
CGroup: /system.slice/apache2.service
├─ 565 /usr/sbin/apache2 -k start
├─ 595 /usr/sbin/apache2 -k start
├─ 600 /usr/sbin/apache2 -k start
├─ 833 /usr/sbin/apache2 -k start
├─1084 /usr/sbin/apache2 -k start
├─1219 /usr/sbin/apache2 -k start
├─1284 /usr/sbin/apache2 -k start
├─1335 /usr/sbin/apache2 -k start
├─1497 /usr/sbin/apache2 -k start
├─1882 /usr/sbin/apache2 -k start
└─1961 /usr/sbin/apache2 -k start
nov 25 16:56:35 raspberrypi systemd[1]: Starting The Apache HTTP Server...
nov 25 16:56:36 raspberrypi systemd[1]: Started The Apache HTTP Server.
Y lo que no entiendo es porque cada vez que ejecuto esta orden, me contesta esto:
pi@raspberrypi:~ $ sudo php /root/meteoclimatic/meteoclimatic_http.php
/var/www/html/weewx/meteoclimatic.htm?
Si quieres algún dato mas....
Gracias de antemano por tu ayuda.
